DMX DC12V RGBw led strip light
1. Control IC DMX512 inserted in 5050 RGB led, one IC control one 5050 and 2835 led, supporting numerous color-change effects. the color temperature of 2835led can customized: Warm white 2800-3200K, Natural white: 4000-4500k, Cool white: 6000-6500K.
2. Standard DMX512 protocol, compatible with Artnet and Madrix, no need decoder.
3. It comes in 5 meters per reel with a 4Pin JST SM connector on both end and separated Power / Ground Wires . Customized length is workable.
4. Flexible PCB material, there is cut lines every 20mm.
5. 50pixels/M. RGBW 4 channels, 12V low voltage inputted , don’t over 13V , otherwise you will destroy the entire strip .
6. 10mm width PCB , 0.25mm thickness with 3M tape back side for non-weatherproof version . 12.5mm width , 4mm thickness with silicon tube for waterproof version .
7. The DMX strip is not auto-addressable, you have to write the DMX address code by DMX address writer/DMX controller.
8. SD card controller, DMX controller, Artnet, Arduino, etc.
|P/N||Size/mm||LED Type||Pixel/m||Luminous||Angle||Voltage||Wattage/m||IP Rate|
W12.5 * L5000mm
|smd5050 smd2835||50 Pixel/m||336||160°||DC12v||8w||IP20/65|
back lights, cabinet lights, edge light, architectural lights for corridor, canopy, archway, lights for path
and contour marking; etc.They can be a good choice for lights for hotels, restaurants, night clubs, coffee / wine bars, shopping malls,
various shops, cinemas, beauty centers, office fronts, even lights for household kitchens or living rooms, etc.