SJ-100120-RGB-24V
SMD5050 RGB 120LEDS strip light
1, This is a 3 in 1 SMD 5050 chip, RGB, 3 channel. Each end of strip soldered non-waterproof bare wire,
2, Standard reel length: 5 meters/roll, also can be customized.
3, Cutted : 3 integrated RGB LEDs per segment, can be cut per 3 LEDs for DC12v, 6LEDs for DC24v.Easily cut with wire cutters, there are cut-lines.
4, Power supply : must use a 12 V DC power supply to power this strip. Do not use higher than 13V,or the entire strip will be destroyed.
5, Non-waterproof IP20 + 3M tape on back side of PCB. Waterproof : silicon tube casing IP65 +10pcs silicon clips & screw for installation, or 3M adhesive back side.
6, LED QTY: 120leds/M, also have 60LEDs/M and 30leds/m. ,
7, LED Brightness: 20-22lm/LED.
8, Controller : Protrol by RGB controller or DMX controller.
P/N | Size/mm | LED Type | Pixel/m | Luminous | Angle | Voltage | Wattage/m | IP Rate |
SJ-100120-RGB | W12 * L1000mm |
smd5050 RGB | 120 Pixel/m | 840 | 160° | DC24v | 28.8w | IP20/65 |
Project case
back lights, cabinet lights, edge light, architectural lights for corridor, canopy, archway, lights for path
and contour marking; etc.They can be a good choice for lights for hotels, restaurants, night clubs, coffee / wine bars, shopping malls,
Video Show :